Please note: All our courses are video recorded for training and quality standard purposes.

Please note: If your delegates' first language is not English, kindly notify us at the time of booking and provide information about their English proficiency level.

Course Aim

This A31 Ride on Roller course will allow candidates’ to competently and safely operate a Ride on Roller, alongside passing the CPCS Practical and Theory tests.

Course Content

  • Identify the basic construction, purpose and function of components and the purpose and use of all controls and gauges.
  • Identify and comply with manufacturers’ instructions in accordance with the operator’s handbook, other information sources and applicable legislation.
  • Carry out all pre-use and running checks.
  • Set the roller for site travel.
  • Travel over differing types of terrain, including undulating ground.
  • Manoeuvre in confined areas using forward and reverse direction.
  • Set the roller for compaction duties.
  • Prepare an area prior to compacting, i.e. traffic/personnel management etc.
  • Compact different materials to given instructions.
  • Compact up to supported and unsupported edges, against radii and around obstructions
  • Place the roller in an out-of-service condition.
  • Recognise compacted and uncompact areas.
  • State conditions that may cause instability of the roller.
  • State safety procedures when working up to unsupported edges.
  • Explain safety procedures when compacting on inclines.
  • Explain the loading and unloading procedures on and off a transporter.

Entry Requirements

  • CITB health, safety and environment test passed no more than two years before the course start date.
  • Good understanding of spoken and written English.
  • Can undertake pre-start, running checks and shut down procedures in accordance with the manufacturers’ handbook.
  • Ability to travel in a forward/reverse direction, through restrictions, confined areas, on level ground, undulating ground and substantial inclines, including hill start procedures.
  • Can configure dumpers to receive and discharge loads.
  • You will need to revise the theory questions before the course.

Available Dates

Start DateEnd DatePriceBook
24/07/24 26/07/24 £570
28/08/24 30/08/24 £570
25/09/24 27/09/24 £570
29/10/24 31/10/24 £570
27/11/24 29/11/24 £570

Duration

3 Days

Location

ATS Group, Lily Annie House, Silchester Road, Tadley, Hampshire, RG26 3PY.

CITB Grant

£TBC p/p

Available for on-site delivery

No

Sectors

Construction

Course Enquiries

Enquire about this course

Please note: All our courses are video recorded for training and quality standard purposes.

Please note: If your delegates' first language is not English, kindly notify us at the time of booking and provide information about their English proficiency level.